QSD Drills

Material
HSS M-35

Standards
IS:5101
DIN 338

Geometry
Helix
32–40°
Point
130°

Suitable Materials
S.S.
Steel
Forged
Steel
Alloy
Steel
Pre
Hardened

Steel


More Details

Description

Technical Specifications

Special size drills & coating available on request.

169 sizes listed

Dia MM (D) Flute Length MM (L1)
Overall Length MM (L)
Pack Qty NOS.
1.00 12 34 10
1.05 12 34 10
1.10 14 36 10
1.15 14 36 10
1.20 16 38 10
1.25 16 38 10
1.30 16 38 10
1.35 18 40 10
1.40 18 40 10
1.45 18 40 10
1.50 18 40 10
1.55 20 43 10
1.60 (1/16″) 20 43 10
1.65 20 43 10
1.70 20 43 10
1.75 22 46 10
1.80 22 46 10
1.85 22 46 10
1.90 22 46 10
1.95 24 49 10
2.00 (5/64″) 24 49 10
2.05 24 49 10
2.10 24 49 10
2.15 27 53 10
2.20 27 53 10
2.25 27 53 10
2.30 27 53 10
2.35 27 53 10
2.40 30 57 10
2.45 30 57 10
2.50 30 57 10
2.55 30 57 10
2.60 30 57 10
2.65 30 57 10
2.70 33 61 10
2.78 (7/64″) 33 61 10
2.80 33 61 10
2.85 33 61 10
2.90 33 61 10
3.00 33 61 10
3.10 36 65 10
3.15 36 65 10
3.20 (1/8″) 36 65 10
3.25 36 65 10
3.30 36 65 10
3.40 39 70 10
3.50 39 70 10
3.60 (9/64″) 39 70 10
3.65 39 70 10
3.70 39 70 10
3.75 39 70 10
3.80 43 75 10
3.90 43 75 10
3.95 43 75 10
4.00 (5/32″) 43 75 10
4.05 43 75 10
4.10 43 75 10
4.15 43 75 10
4.20 43 75 10
4.25 43 75 10
4.30 47 80 10
4.37 (11/64″) 47 80 10
4.40 47 80 10
4.50 47 80 10
4.55 47 80 10
4.60 47 80 10
4.70 47 80 10
4.75 (3/16″) 52 86 10
4.80 52 86 10
4.85 52 86 10
4.90 52 86 10
4.95 52 86 10
5.00 52 86 10
5.10 52 86 10
5.20 (13/64″) 52 86 10
5.25 52 86 10
5.30 52 86 10
5.40 57 93 10
5.50 57 93 10
5.60 (7/32″) 57 93 10
5.70 57 93 10
5.75 57 93 10
5.80 57 93 10
5.90 57 93 10
6.00 (15/64″) 57 93 10
6.10 63 101 10
6.20 63 101 10
6.25 63 101 10
6.30 63 101 10
6.40 (1/4″) 63 101 10
6.50 63 101 10
6.60 63 101 10
6.70 63 101 10
6.75 (17/64″) 69 109 10
6.80 69 109 10
6.90 69 109 10
7.00 69 109 10
7.10 69 109 10
7.20 (9/32″) 69 109 10
7.25 69 109 10
7.30 69 109 10
7.40 69 109 10
7.50 69 109 10
7.60 (19/64″) 75 117 10
7.70 75 117 10
7.75 75 117 10
7.80 75 117 10
7.90 75 117 10
8.00 (5/16″) 75 117 10
8.10 75 117 10
8.20 75 117 10
8.30 75 117 10
8.40 (21/64″) 75 117 10
8.50 75 117 10
8.60 81 125 10
8.65 81 125 10
8.70 81 125 10
8.75 (11/32″) 81 125 10
8.80 81 125 10
8.90 81 125 10
9.00 81 125 10
9.10 (23/64″) 81 125 10
9.20 81 125 10
9.25 81 125 10
9.30 81 125 10
9.40 81 125 10
9.50 81 125 10
9.60 (3/8″) 87 133 10
9.70 87 133 10
9.75 87 133 10
9.80 87 133 10
9.90 87 133 10
10.00 (25/64″) 87 133 10
10.10 87 133 10
10.20 87 133 10
10.25 (13/32″) 87 133 10
10.30 87 133 10
10.40 87 133 10
10.50 87 133 10
10.60 87 133 10
10.70 (27/64″) 94 142 10
10.75 94 142 10
10.80 94 142 10
10.90 94 142 10
11.00 94 142 10
11.10 (7/16″) 94 142 10
11.20 94 142 10
11.25 94 142 10
11.30 94 142 10
11.40 94 142 10
11.50 (29/64″) 94 142 10
11.60 94 142 10
11.70 94 142 10
11.75 94 142 10
11.80 94 142 10
11.90 (15/32″) 101 151 10
12.00 101 151 10
12.10 101 151 10
12.20 101 151 10
12.25 101 151 10
12.30 (31/64″) 101 151 10
12.40 101 151 10
12.50 101 151 10
12.60 101 151 10
12.70 (1/2″) 101 151 10
12.75 101 151 10
12.80 101 151 10
12.90 101 151 10
13.00 101 151 10

No sizes match your search. Try a different diameter.

All dimensions are nominal and subject to standard manufacturing tolerance. Fractional inch sizes shown in brackets are the nearest imperial equivalent.

  • Inch size: 5/64" to 1/2"
  • Metric size: 1.5 mm to 13.0 mm
  • High helix flute and reinforced web gives maximum rigidity.
  • Improved cutting action and faster chip evacuation. Self centering drill with special web thinning that reduces thurst.
  • Trouble free drilling for high alloy steel material.
  • Reduced contact area that results into less heat generation.
  • Good for drilling on curved surface.
  • Higher productivity as compared to standard drill on hard metal drilling.
  • 130° self-centering split point that requires less torque and thrust in machine drilling and thus reduce axial force and increases tool life. This point helps break up chips in deep hole drilling and is an excellent choice when used on CNC  quipment.
  • Higher helix angle are and perform well for gummy materials like alluminium and excel in stainless and heat resistance alloys.
  • Recommended for Stainless steel,Aluminium,Brass and other non ferrous metals.
Technical Specifications

9 diameters listed
Work Material Steels containing a high proportion (>10%) of nickel chrome and nickle Corrosion and heat resisting alloys containing a high proportion of carbon, chrome, and molybdenum Titanium Alloy
cutting speed 10 m/min. cutting speed 6.3 m/min. cutting speed 4 m/min.
Dia (mm) Rev. per min Feed mm/rev. Rev. per min Feed mm/rev. Rev. per min Feed mm/rev.
2 1600 0.02 1000 0.02 630 0.02
2.5 1250 0.02 800 0.02 500 0.02
3.15 1000 0.03 630 0.03 400 0.03
4 800 0.04 500 0.04 315 0.04
5 630 0.05 400 0.04 250 0.04
6.3 500 0.06 315 0.04 200 0.04
8 400 0.08 250 0.06 160 0.06
10 315 0.1 200 0.08 125 0.08
12.5 250 0.1 160 0.08 100 0.08

No sizes match your search.

All values are recommended starting points. Adjust according to machine condition, tool sharpness and workpiece setup.

+3600-365-2596