Tungsten Carbide Tipped Tools CTT


Technical Details

Description

TUNGSTEN CARBIDE TIPPED TOOLS — CTT



















110 BAR TURNING TOOL (ISO 1) SHANK
SECTION
Tool No. H (mm) B (mm) C (mm) L (mm) Tip RH Tip LH
110 BAR TURNING TOOL (ISO 1) diagram Shank section 110-1010 10 10 4 90 A8 B8
110-1212 12 12 5 100 A 10 B 10
110-1616 16 16 6 110 A 12 B 12
110-2020 20 20 8 125 A 16 B 16
110-2525 25 25 10 140 A 20 B 20
110-3232 32 32 12 170 A 25 B 25
110-4040 40 40 16 200 A 32 B 32
Shank section 110-1610 16 10 4 110 A 10 B 10
110-2012 20 12 5 125 A 12 B 12
110-2516 25 16 6 140 A 16 B 16
110-3220 32 20 8 170 A 20 B 20
110-4025 40 25 10 200 A 25 B 25

Application Of Carbides For Machining, Ranges Of Application And Colour Code

Identification Colour
Designation
P10 & P20
P10 and P20 carbide grade
Material to be Machined
Steel, steel casting Machining Conditions Turning
Machining Conditions: Turning
Threading and Milling — High cutting speed
Material to be Machined
Steel, steel casting, malleable cast iron forming long chips. Machining and milling — medium cutting speed and medium chip section. Planing with small chip section.
P30
P30 carbide grade
Material to be Machined
Steel, steel casting, malleable cast iron forming long chips.
Machining Conditions
Turning, Milling and Planing — medium or low cutting speed, medium or large chip section and machining under unfavourable conditions such as heat-erosive material, changing hardness or chip section, intermittent turning or vibration.
P40
P40 carbide grade
Material to be Machined
Steel, steel casting, with sand inclusions or shrinkage cavities.
Machining Conditions
Turning and Planing using a large rake angle, for machining under unfavourable conditions such as heat-erosive materials, changing hardness or chip sections, intermittent turning or vibration, and work on automatic machines.
K10 & K20
K10 and K20 carbide grade
Material to be Machined
Grey cast iron of hardness more than 220 HB, Malleable cast iron forming
short chips, tempered steel, Aluminum alloy containing silicon, copper
alloys, plastics, glass, hard rubber, hard cardboard, porcelain,stone.
Material to be Machined
Grey cast iron of harness more than 220 HB, Non-ferrous metals, such as copper, Brass, Aluminium, Laminated wood of abrasive type machining, conditions.
Turning, Milling, planing, requiring, high toughness.